7.SAUVEGARDE DE MON FICHIER

Version actuelle en date du 26 septembre 2009 à 21:14

Au préalable: Je vais commencer par sauvegarder mon fichier avec la commande :

Et pour faire simple, je vais modifier tout mon fichier de configuration d'un coup pour ne plus devoir revenir dessus :

NOTES :

va m'indiquer que c'est un répertoire, d'où le choix de l'option importante :

• -veut dire fichier
• d veut dire répertoire

voir aussi man cp

8.MODIFICATION DE MON FICHIER

S'agissant des mots de passe, à la question :

1.doit-on spécifier des mots de passe fabriqués au pied levé ou doit-on utiliser un mot de passe de style nom_de_machine? 2. Y a-t-il un nombre de caractères spécifié ou non?

1. Pour éviter que le serveur ne vous demande à chaque connection, un mot de passe et soyez authentifié, il est en effet recommandé de créer un mot de passe autre que celui de la machine. 2. Non

servers = (

 { address = "irc.stealth.net"; chatnet = "IRCnet"; port = "6668"; },
 { address = "irc.efnet.org"; chatnet = "EFNet"; port = "6667"; },
 {
   address = "irc.undernet.org";
   chatnet = "Undernet";
   port = "6667";
 },
 { address = "irc.dal.net"; chatnet = "DALnet"; port = "6667"; },
 {
   address = "irc.quakenet.org";
   chatnet = "QuakeNet";
   port = "6667";
 },
 { address = "silc.silcnet.org"; chatnet = "SILC"; port = "706"; }

);

servers = (

 {
   address = "irc.freenode.org";
   chatnet = "freenode";
   port = "6667";
   autoconnect = "yes";
   term_type = "utf-8";
 }

);

servers = (

 {
   address = "irc.netrusk.net";
   chatnet = "netrusk";
   port = "6667";
   autoconnect = "yes";
   term_type = "utf-8";
 }

);

chatnets = {

 IRCnet = {
   type = "IRC";
   max_kicks = "4";
   max_msgs = "5";
   max_whois = "4";
   max_query_chans = "5";
 };
 EFNet = {
   type = "IRC";
   max_kicks = "4";
   max_msgs = "3";
   max_whois = "1";
 };
 Undernet = {
   type = "IRC";
   max_kicks = "1";
   max_msgs = "3";
   max_whois = "30";
 };
 DALnet = {
   type = "IRC";
   max_kicks = "4";
   max_msgs = "3";
   max_whois = "30";
 };
 QuakeNet = {
   type = "IRC";
   max_kicks = "1";
   max_msgs = "3";
   max_whois = "30";
 };
 SILC = { type = "SILC"; };

};

chatnets = {

 freenode = {
   type = "IRC";
   nick = "francoise";
   autosendcmd = "/msg NickServ mont_mot_de_passe";
   # Si la page de t'chat avec NickServ vous dérange, décommentez la ligne suivante.
   # autosendcmd = "/unquery NickServ";
 };

};

chatnets = {

 netrusk = {
   type = "IRC";
   nick = "votre_pseudo";
   autosendcmd = "/msg NickServ identify votre_mot_de_passe";
   # Si la page de t'chat avec NickServ vous dérange, décommentez la ligne suivante.
   # autosendcmd = "/unquery NickServ";
 };

};

channels = (

 { name = "#irssi"; chatnet = "ircnet"; autojoin = "No"; },
 { name = "silc"; chatnet = "silc"; autojoin = "No"; }

);

channels = (

{ name = "#ubuntu-fr"; chatnet = "freenode"; autojoin = "no";},

 { name = "#debianfr"; chatnet = "freenode"; autojoin = "yes"; },
 { name = "#linux62.org"; chatnet = "NetRusk"; autojoin = "yes";}

); aliases = {

 J = "join";
 WJOIN = "join -window";
 WQUERY = "query -window";
 LEAVE = "part";
 BYE = "quit";
 EXIT = "quit";
 SIGNOFF = "quit";
 DESCRIBE = "action";
 DATE = "time";
 HOST = "userhost";
 LAST = "lastlog";
 SAY = "msg *";
 WI = "whois";
 WII = "whois $0 $0";
 WW = "whowas";
 W = "who";
 N = "names";
 M = "msg";
 T = "topic";
 C = "clear";
 CL = "clear";
 K = "kick";
 KB = "kickban";
 KN = "knockout";
 BANS = "ban";
 B = "ban";
 MUB = "unban *";
 UB = "unban";
 IG = "ignore";
 UNIG = "unignore";
 SB = "scrollback";
 UMODE = "mode $N";
 WC = "window close";
 WN = "window new hide";
 SV = "say Irssi $J ($V) - http://irssi.org/";
 GOTO = "sb goto";
 CHAT = "dcc chat";
 RUN = "SCRIPT LOAD";
 CALC = "exec - if which bc &>/dev/null\\; then echo '$*' | bc | awk '{print \"$*=\"$$1}'\\; else echo bc was not found\\; fi";
 SBAR = "STATUSBAR";
 INVITELIST = "mode $C +I";
 Q = "QUERY";
 "MANUAL-WINDOWS" = "set use_status_window off;set autocreate_windows off;set autocreate_query_level none;set autoclose_windows off;set reuse_unused_windows on;save";
 EXEMPTLIST = "mode $C +e";
 ATAG = "WINDOW SERVER";

};

statusbar = {

 # formats:
 # when using {templates}, the template is shown only if it's argument isn't
 # empty unless no argument is given. for example {sb} is printed always,
 # but {sb $T} is printed only if $T isn't empty.

 items = {
   # start/end text in statusbars
   barstart = "{sbstart}";
   barend = "{sbend}";

   topicbarstart = "{topicsbstart}";
   topicbarend = "{topicsbend}";

   # treated "normally", you could change the time/user name to whatever
   time = "{sb $Z}";
   user = "{sb {sbnickmode $cumode}$N{sbmode $usermode}{sbaway $A}}";

   # treated specially .. window is printed with non-empty windows,
   # window_empty is printed with empty windows
   window = "{sb $winref:$tag/$itemname{sbmode $M}}";
   window_empty = "{sb $winref{sbservertag $tag}}";
   prompt = "{prompt $[.15]itemname}";
   prompt_empty = "{prompt $winname}";
   topic = " $topic";
   topic_empty = " Irssi v$J - http://www.irssi.org";

   # all of these treated specially, they're only displayed when needed
   lag = "{sb Lag: $0-}";
   act = "{sb Act: $0-}";
   more = "-- more --";
 };

 # there's two type of statusbars. root statusbars are either at the top
 # of the screen or at the bottom of the screen. window statusbars are at
 # the top/bottom of each split window in screen.
 default = {
   # the "default statusbar" to be displayed at the bottom of the window.
   # contains all the normal items.
   window = {
     disabled = "no";

     # window, root
     type = "window";
     # top, bottom
     placement = "bottom";
     # number
     position = "1";
     # active, inactive, always
     visible = "active";

     # list of items in statusbar in the display order
     items = {
       barstart = { priority = "100"; };
       time = { };
       user = { };
       window = { };
       window_empty = { };
       lag = { priority = "-1"; };
       act = { priority = "10"; };
       more = { priority = "-1"; alignment = "right"; };
       barend = { priority = "100"; alignment = "right"; };
     };
   };

   # statusbar to use in inactive split windows
   window_inact = {
     type = "window";
     placement = "bottom";
     position = "1";
     visible = "inactive";
     items = {
       barstart = { priority = "100"; };
       window = { };
       window_empty = { };
       more = { priority = "-1"; alignment = "right"; };
       barend = { priority = "100"; alignment = "right"; };
     };
   };

   # we treat input line as yet another statusbar :) It's possible to
   # add other items before or after the input line item.
   prompt = {
     type = "root";
     placement = "bottom";
     # we want to be at the bottom always
     position = "100";
     visible = "always";
     items = {
       prompt = { priority = "-1"; };
       prompt_empty = { priority = "-1"; };
       # treated specially, this is the real input line.
       input = { priority = "10"; };
     };
   };

   # topicbar
   topic = {
     type = "root";
     placement = "top";
     position = "1";
     visible = "always";
     items = {
       topicbarstart = { priority = "100"; };
       topic = { };
       topic_empty = { };
       topicbarend = { priority = "100"; alignment = "right"; };
     };
   };
 };

}; settings = { "fe-text" = { actlist_sort = "refnum"; }; }; francoise@debian:~$

enregistrer :w q enter

astuce : pour me déplacer dans vi j'utilise $ et 0 je reviens facilement en début de ligne ou en fin de ligne pour rechercher un emplacement : /mot_recherché

note : à tout moment vous pourrez modifier ce qui est souligné ou en caractère gras DANS LE FICHIER DE CONFIG PAR « yes » ou « no »

                                                                           [HAUT]