7.SAUVEGARDE DE MON FICHIER
De Wiki Linux62.
Au préalable: Je vais commencer par sauvegarder mon fichier avec la commande :
~$cp -vR .irssi/config .irssi/config.save |
Et pour faire simple, je vais modifier tout mon fichier de configuration d'un coup pour ne plus devoir revenir dessus :
NOTES :
ls -al $HOME/.irssi |
va m'indiquer que c'est un répertoire, d'où le choix de l'option importante :
- -veut dire fichier
- d veut dire répertoire
voir aussi man cp
S'agissant des mots de passe, à la question :
1.doit-on spécifier des mots de passe fabriqués au pied levé ou doit-on utiliser un mot de passe de style nom_de_machine? 2. Y a-t-il un nombre de caractères spécifié ou non?
1. Pour éviter que le serveur ne vous demande à chaque connection, un mot de passe et soyez authentifié, il est en effet recommandé de créer un mot de passe autre que celui de la machine. 2. Non
~$sudo vi .irssi/config |
servers = (
{ address = "irc.stealth.net"; chatnet = "IRCnet"; port = "6668"; }, { address = "irc.efnet.org"; chatnet = "EFNet"; port = "6667"; }, { address = "irc.undernet.org"; chatnet = "Undernet"; port = "6667"; }, { address = "irc.dal.net"; chatnet = "DALnet"; port = "6667"; }, { address = "irc.quakenet.org"; chatnet = "QuakeNet"; port = "6667"; }, { address = "silc.silcnet.org"; chatnet = "SILC"; port = "706"; }
);
servers = (
{ address = "irc.freenode.org"; chatnet = "freenode"; port = "6667"; autoconnect = "yes"; term_type = "utf-8"; }
);
servers = (
{ address = "irc.netrusk.net"; chatnet = "netrusk"; port = "6667"; autoconnect = "yes"; term_type = "utf-8"; }
);
chatnets = {
IRCnet = { type = "IRC"; max_kicks = "4"; max_msgs = "5"; max_whois = "4"; max_query_chans = "5"; }; EFNet = { type = "IRC"; max_kicks = "4"; max_msgs = "3"; max_whois = "1"; }; Undernet = { type = "IRC"; max_kicks = "1"; max_msgs = "3"; max_whois = "30"; }; DALnet = { type = "IRC"; max_kicks = "4"; max_msgs = "3"; max_whois = "30"; }; QuakeNet = { type = "IRC"; max_kicks = "1"; max_msgs = "3"; max_whois = "30"; }; SILC = { type = "SILC"; };
};
chatnets = {
freenode = { type = "IRC"; nick = "francoise"; autosendcmd = "/msg NickServ mont_mot_de_passe"; # Si la page de t'chat avec NickServ vous dérange, décommentez la ligne suivante. # autosendcmd = "/unquery NickServ"; };
};
chatnets = {
netrusk = { type = "IRC"; nick = "votre_pseudo"; autosendcmd = "/msg NickServ identify votre_mot_de_passe"; # Si la page de t'chat avec NickServ vous dérange, décommentez la ligne suivante. # autosendcmd = "/unquery NickServ"; };
};
channels = (
{ name = "#irssi"; chatnet = "ircnet"; autojoin = "No"; }, { name = "silc"; chatnet = "silc"; autojoin = "No"; }
);
channels = (
{ name = "#ubuntu-fr"; chatnet = "freenode"; autojoin = "no";},
{ name = "#debianfr"; chatnet = "freenode"; autojoin = "yes"; }, { name = "#linux62.org"; chatnet = "NetRusk"; autojoin = "yes";}
); aliases = {
J = "join"; WJOIN = "join -window"; WQUERY = "query -window"; LEAVE = "part"; BYE = "quit"; EXIT = "quit"; SIGNOFF = "quit"; DESCRIBE = "action"; DATE = "time"; HOST = "userhost"; LAST = "lastlog"; SAY = "msg *"; WI = "whois"; WII = "whois $0 $0"; WW = "whowas"; W = "who"; N = "names"; M = "msg"; T = "topic"; C = "clear"; CL = "clear"; K = "kick"; KB = "kickban"; KN = "knockout"; BANS = "ban"; B = "ban"; MUB = "unban *"; UB = "unban"; IG = "ignore"; UNIG = "unignore"; SB = "scrollback"; UMODE = "mode $N"; WC = "window close"; WN = "window new hide"; SV = "say Irssi $J ($V) - http://irssi.org/"; GOTO = "sb goto"; CHAT = "dcc chat"; RUN = "SCRIPT LOAD"; CALC = "exec - if which bc &>/dev/null\\; then echo '$*' | bc | awk '{print \"$*=\"$$1}'\\; else echo bc was not found\\; fi"; SBAR = "STATUSBAR"; INVITELIST = "mode $C +I"; Q = "QUERY"; "MANUAL-WINDOWS" = "set use_status_window off;set autocreate_windows off;set autocreate_query_level none;set autoclose_windows off;set reuse_unused_windows on;save"; EXEMPTLIST = "mode $C +e"; ATAG = "WINDOW SERVER";
};
statusbar = {
# formats: # when using {templates}, the template is shown only if it's argument isn't # empty unless no argument is given. for example {sb} is printed always, # but {sb $T} is printed only if $T isn't empty.
items = { # start/end text in statusbars barstart = "{sbstart}"; barend = "{sbend}";
topicbarstart = "{topicsbstart}"; topicbarend = "{topicsbend}";
# treated "normally", you could change the time/user name to whatever time = "{sb $Z}"; user = "{sb {sbnickmode $cumode}$N{sbmode $usermode}{sbaway $A}}";
# treated specially .. window is printed with non-empty windows, # window_empty is printed with empty windows window = "{sb $winref:$tag/$itemname{sbmode $M}}"; window_empty = "{sb $winref{sbservertag $tag}}"; prompt = "{prompt $[.15]itemname}"; prompt_empty = "{prompt $winname}"; topic = " $topic"; topic_empty = " Irssi v$J - http://www.irssi.org";
# all of these treated specially, they're only displayed when needed lag = "{sb Lag: $0-}"; act = "{sb Act: $0-}"; more = "-- more --"; };
# there's two type of statusbars. root statusbars are either at the top # of the screen or at the bottom of the screen. window statusbars are at # the top/bottom of each split window in screen. default = { # the "default statusbar" to be displayed at the bottom of the window. # contains all the normal items. window = { disabled = "no";
# window, root type = "window"; # top, bottom placement = "bottom"; # number position = "1"; # active, inactive, always visible = "active";
# list of items in statusbar in the display order items = { barstart = { priority = "100"; }; time = { }; user = { }; window = { }; window_empty = { }; lag = { priority = "-1"; }; act = { priority = "10"; }; more = { priority = "-1"; alignment = "right"; }; barend = { priority = "100"; alignment = "right"; }; }; };
# statusbar to use in inactive split windows window_inact = { type = "window"; placement = "bottom"; position = "1"; visible = "inactive"; items = { barstart = { priority = "100"; }; window = { }; window_empty = { }; more = { priority = "-1"; alignment = "right"; }; barend = { priority = "100"; alignment = "right"; }; }; };
# we treat input line as yet another statusbar :) It's possible to # add other items before or after the input line item. prompt = { type = "root"; placement = "bottom"; # we want to be at the bottom always position = "100"; visible = "always"; items = { prompt = { priority = "-1"; }; prompt_empty = { priority = "-1"; }; # treated specially, this is the real input line. input = { priority = "10"; }; }; };
# topicbar topic = { type = "root"; placement = "top"; position = "1"; visible = "always"; items = { topicbarstart = { priority = "100"; }; topic = { }; topic_empty = { }; topicbarend = { priority = "100"; alignment = "right"; }; }; }; };
}; settings = { "fe-text" = { actlist_sort = "refnum"; }; }; francoise@debian:~$
astuce : pour me déplacer dans vi j'utilise $ et 0
je reviens facilement en début de ligne ou en fin de ligne
pour rechercher un emplacement :
/mot_recherché
note : à tout moment vous pourrez modifier ce qui est souligné ou en caractère gras DANS LE FICHIER DE CONFIG PAR « yes » ou « no »
8.MODIFICATION DE MON FICHIER
S'agissant des mots de passe, à la question :
1.doit-on spécifier des mots de passe fabriqués au pied levé ou doit-on utiliser un mot de passe de style nom_de_machine? 2. Y a-t-il un nombre de caractères spécifié ou non?
1. Pour éviter que le serveur ne vous demande à chaque connection, un mot de passe et soyez authentifié, il est en effet recommandé de créer un mot de passe autre que celui de la machine. 2. Non
~$sudo vi .irssi/config |
servers = (
{ address = "irc.stealth.net"; chatnet = "IRCnet"; port = "6668"; }, { address = "irc.efnet.org"; chatnet = "EFNet"; port = "6667"; }, { address = "irc.undernet.org"; chatnet = "Undernet"; port = "6667"; }, { address = "irc.dal.net"; chatnet = "DALnet"; port = "6667"; }, { address = "irc.quakenet.org"; chatnet = "QuakeNet"; port = "6667"; }, { address = "silc.silcnet.org"; chatnet = "SILC"; port = "706"; }
);
servers = (
{ address = "irc.freenode.org"; chatnet = "freenode"; port = "6667"; autoconnect = "yes"; term_type = "utf-8"; }
);
servers = (
{ address = "irc.netrusk.net"; chatnet = "netrusk"; port = "6667"; autoconnect = "yes"; term_type = "utf-8"; }
);
chatnets = {
IRCnet = { type = "IRC"; max_kicks = "4"; max_msgs = "5"; max_whois = "4"; max_query_chans = "5"; }; EFNet = { type = "IRC"; max_kicks = "4"; max_msgs = "3"; max_whois = "1"; }; Undernet = { type = "IRC"; max_kicks = "1"; max_msgs = "3"; max_whois = "30"; }; DALnet = { type = "IRC"; max_kicks = "4"; max_msgs = "3"; max_whois = "30"; }; QuakeNet = { type = "IRC"; max_kicks = "1"; max_msgs = "3"; max_whois = "30"; }; SILC = { type = "SILC"; };
};
chatnets = {
freenode = { type = "IRC"; nick = "francoise"; autosendcmd = "/msg NickServ mont_mot_de_passe"; # Si la page de t'chat avec NickServ vous dérange, décommentez la ligne suivante. # autosendcmd = "/unquery NickServ"; };
};
chatnets = {
netrusk = { type = "IRC"; nick = "votre_pseudo"; autosendcmd = "/msg NickServ identify votre_mot_de_passe"; # Si la page de t'chat avec NickServ vous dérange, décommentez la ligne suivante. # autosendcmd = "/unquery NickServ"; };
};
channels = (
{ name = "#irssi"; chatnet = "ircnet"; autojoin = "No"; }, { name = "silc"; chatnet = "silc"; autojoin = "No"; }
);
channels = (
{ name = "#ubuntu-fr"; chatnet = "freenode"; autojoin = "no";},
{ name = "#debianfr"; chatnet = "freenode"; autojoin = "yes"; }, { name = "#linux62.org"; chatnet = "NetRusk"; autojoin = "yes";}
); aliases = {
J = "join"; WJOIN = "join -window"; WQUERY = "query -window"; LEAVE = "part"; BYE = "quit"; EXIT = "quit"; SIGNOFF = "quit"; DESCRIBE = "action"; DATE = "time"; HOST = "userhost"; LAST = "lastlog"; SAY = "msg *"; WI = "whois"; WII = "whois $0 $0"; WW = "whowas"; W = "who"; N = "names"; M = "msg"; T = "topic"; C = "clear"; CL = "clear"; K = "kick"; KB = "kickban"; KN = "knockout"; BANS = "ban"; B = "ban"; MUB = "unban *"; UB = "unban"; IG = "ignore"; UNIG = "unignore"; SB = "scrollback"; UMODE = "mode $N"; WC = "window close"; WN = "window new hide"; SV = "say Irssi $J ($V) - http://irssi.org/"; GOTO = "sb goto"; CHAT = "dcc chat"; RUN = "SCRIPT LOAD"; CALC = "exec - if which bc &>/dev/null\\; then echo '$*' | bc | awk '{print \"$*=\"$$1}'\\; else echo bc was not found\\; fi"; SBAR = "STATUSBAR"; INVITELIST = "mode $C +I"; Q = "QUERY"; "MANUAL-WINDOWS" = "set use_status_window off;set autocreate_windows off;set autocreate_query_level none;set autoclose_windows off;set reuse_unused_windows on;save"; EXEMPTLIST = "mode $C +e"; ATAG = "WINDOW SERVER";
};
statusbar = {
# formats: # when using {templates}, the template is shown only if it's argument isn't # empty unless no argument is given. for example {sb} is printed always, # but {sb $T} is printed only if $T isn't empty.
items = { # start/end text in statusbars barstart = "{sbstart}"; barend = "{sbend}";
topicbarstart = "{topicsbstart}"; topicbarend = "{topicsbend}";
# treated "normally", you could change the time/user name to whatever time = "{sb $Z}"; user = "{sb {sbnickmode $cumode}$N{sbmode $usermode}{sbaway $A}}";
# treated specially .. window is printed with non-empty windows, # window_empty is printed with empty windows window = "{sb $winref:$tag/$itemname{sbmode $M}}"; window_empty = "{sb $winref{sbservertag $tag}}"; prompt = "{prompt $[.15]itemname}"; prompt_empty = "{prompt $winname}"; topic = " $topic"; topic_empty = " Irssi v$J - http://www.irssi.org";
# all of these treated specially, they're only displayed when needed lag = "{sb Lag: $0-}"; act = "{sb Act: $0-}"; more = "-- more --"; };
# there's two type of statusbars. root statusbars are either at the top # of the screen or at the bottom of the screen. window statusbars are at # the top/bottom of each split window in screen. default = { # the "default statusbar" to be displayed at the bottom of the window. # contains all the normal items. window = { disabled = "no";
# window, root type = "window"; # top, bottom placement = "bottom"; # number position = "1"; # active, inactive, always visible = "active";
# list of items in statusbar in the display order items = { barstart = { priority = "100"; }; time = { }; user = { }; window = { }; window_empty = { }; lag = { priority = "-1"; }; act = { priority = "10"; }; more = { priority = "-1"; alignment = "right"; }; barend = { priority = "100"; alignment = "right"; }; }; };
# statusbar to use in inactive split windows window_inact = { type = "window"; placement = "bottom"; position = "1"; visible = "inactive"; items = { barstart = { priority = "100"; }; window = { }; window_empty = { }; more = { priority = "-1"; alignment = "right"; }; barend = { priority = "100"; alignment = "right"; }; }; };
# we treat input line as yet another statusbar :) It's possible to # add other items before or after the input line item. prompt = { type = "root"; placement = "bottom"; # we want to be at the bottom always position = "100"; visible = "always"; items = { prompt = { priority = "-1"; }; prompt_empty = { priority = "-1"; }; # treated specially, this is the real input line. input = { priority = "10"; }; }; };
# topicbar topic = { type = "root"; placement = "top"; position = "1"; visible = "always"; items = { topicbarstart = { priority = "100"; }; topic = { }; topic_empty = { }; topicbarend = { priority = "100"; alignment = "right"; }; }; }; };
}; settings = { "fe-text" = { actlist_sort = "refnum"; }; }; francoise@debian:~$
astuce : pour me déplacer dans vi j'utilise $ et 0
je reviens facilement en début de ligne ou en fin de ligne
pour rechercher un emplacement :
/mot_recherché
note : à tout moment vous pourrez modifier ce qui est souligné ou en caractère gras DANS LE FICHIER DE CONFIG PAR « yes » ou « no »